System Manual

BreezeCOMPACT System Manual
136
Chapter 4: Events and Alarms
No.
Event Name
Description
Guideline
6
Device is Up and Running
The device is Up and
available
The event is raised when
the
device is up and
running after being
initialized.
This event must be the
first one issued after
initialization completes.
7
Upload Device Configuration
File started
Upload Device Configuration
File is started
8
Upload Device Configuration
File completed
Upload Device Configuration
File is completed
10
Download Device Configuration
File started
Download Device
Configuration File is started
11
Download Device Configuration
File completed
Download Device
Configuration File is
completed
12
Upload Device Logs Files
started
Upload Device Logs Files is
started
13
Upload Device Logs Files
completed
Upload Device Logs Files is
completed
14
Spectrum Analyzer Enabled
The spectrum analyzer is
enabled, the Tx ports will
stop transmit
The system events
triggers together with
Critical
alarms TX shut
-
down
15
Spectrum Analyzer Disabled
The spectrum analyzer is
disabled the Tx ports will
start transmitting
4.6
BreezeCOMPACT – Alarms
Table 4-2 describes the alarms supported in the current release.
Table 4-2: BreezeCOMPACT Alarms
Alarm Name
Severity
Alarm Description
Problem Cause/Guideline
Device High
Temperature
Critical
The device temperature is
too high.
SW Upgrade, Run
f
rom Backup
Failure
Minor
A failure occurred while
booting up using the backup
image residing in the device
flash.
SW Upgrade, Set as
Main Failure
Minor
A failure occurred while
trying to set the backup
image as the main image.
Device Connection
Lost
Minor
BreezeVIEW lost connection
with the device.
The event is detected and
initiated by BreezeVIEW
upon detecting a link failure
with a unit.
Data Port is down
Critical
Connectivity with Data port
has been lost.
should be raised only on
connection change, from
connected to lost connection