System Manual

BreezeCOMPACT System Manual
120
Chapter 3: Operation and Administration
Procedures
Performance Monitoring
3.10.2.7.1
Spectrum analyzer events in BreezeVIEW
When spectrum analyzer is enabled, TX power shutdown event is raised in Home page
Knowledge Center.
System event is raised for spectrum analyzer disable or enabled.
3.11
Performance Monitoring
3.11.1
Purpose
This procedure describes how to access and to use the Device Performance View in order to
collect and view Key Performance Indicators (KPIs).
3.11.2
Procedure
For performance monitoring, measurements are collected at five-minute intervals.
The following are described in this section:

Accessing
KPIs
,
page 120

Using the Device Performance Graphical
Display
,
page 122

Exporting KPIs to
Excel
,
page 126

Selecting the Performance Display
Time
,
page 126

Printing and Saving
Charts
,
page 127
3.11.2.1
Accessing KPIs
¾ To access KPIs:
 To access KPIs, click the P
Performance
button. The location of this button varies,
depending on the window from which you make your selection, as follows:
70 From the
Device Details window: Click the
Performance
button.
Figure 106: Accessing the KPI – Device Details Window