System Manual

BreezeCOMPACT System Manual
110
Chapter 3: Operation and Administration
Procedures
Rebooting BreezeCOMPACT from BreezeVIEW
3.8.2.2
Unlocking and Synchronizing a Device
¾ To unlock and synchronize a device:
1
Select a locked device in the Devices window.
2
Click the A
Admin Actions
icon and select U
Unlock & Sync From Device
.
Figure 96: Unlock & Sync From Device
Alternatively, you can select a device in the Device
Details window. As a result the following screen will
show up :
Figure 84: Unlock & Sync From
Device reset warning message on
BREEZEVIEW
3
Click the Yes button in order to apply the unlocking.
4
After unlocking the device, the device is in the M
Managed
state. The device’s parameters are
shown in the GUI.
3.9
Rebooting BreezeCOMPACT from BreezeVIEW
3.9.1
Purpose
This procedure describes how to perform a BreezeCOMPACT Manual Reset operation from
BreezeVIEW. Use this procedure to implement configuration changes or to resolve issues,
when necessary.