System Manual

BreezeCOMPACT System Manual
108
Chapter 3: Operation and Administration
Procedures
Provisioning BreezeCOMPACT Using a Template
Important remark : The "apply from template" button will be enabled only if at least 1
module is chosen .
69 From the New Devices area in the
Home page:
Figure 92: Apply From Template – New Devices Area of Home Page
The Apply a Template window displays:
Figure 93: Apply a Template Window
7
Select the relevant template and click O
OK
.
8
Click the S
Save
button.
9
Manually provision the BreezeCOMPACT device.
10
Click the S
Save
button.
11
Reset the device to activate the configuration changes, as described in Section 3.10.1,
Locking and Unlocking a Device.