System Manual

BreezeCOMPACT System Manual
105
Chapter 3: Operation and Administration
Procedures
Provisioning BreezeCOMPACT Using a Template
The device is set to its factory defaults and begins a reset process. Its M
Management Status
shows U
Unreachable
while the device is resetting.
Figure 85: Management Status – Unreachable
3
Verify that the M
Management Status
shows M
Managed
once the reset completes.
3.7
Provisioning BreezeCOMPACT Using a Template
3.7.1
Purpose
This procedure describes how to provision BreezeCOMPACT using a predefined template.
3.7.2
Procedure
Provisioning BreezeCOMPACT using a template involves the following general steps:
 Defining a new template name using the BreezeVIEW N
New Template
option
 Auto-discovery of a new BreezeCOMPACT device after its commissioning
 Applying a template to the new BreezeCOMPACT device using the A
Assign
Template
option
 Completing manual provisioning on BreezeCOMPACT
 Resetting the BreezeCOMPACT to activate the provisioning changes