User Manual

BreezeCOMPACT System Manual
Chapter 3 - Operation and AdministrationGPS Menu
Chapter 3 - Operation and Administration GPS Menu
84
3.9 GPS Menu
The GPS menu includes the following options:
 General Configuration
 Inventory & Statuses
3.9.1 General Configuration
The GPS General Configuration menu enables viewing/updating the following parameters:
3.9.1.1 GPS Type
The type of time synchronization source to be used. The currently available options are None and
TrimbleLassen.
The default is TrimbleLassen.
A change in GPS Type will take effect after next reset.
3.9.1.2 Longitude
The longitude of the site. The format is lll.mmm,a: lll.is longitude in degrees (between 000 to 179);
mmm is in minutes (between 000 and 999); a - is E (east) or W (west). The default is 000.000,E.
Configurable only if GPS Type set to None. Otherwise it is read-only, displaying the value calculated by
the GPS receiver.
3.9.1.3 Latitude
The latitude of the site. The format is ll.mmm,a: ll.is latitude in degrees (between 00 to 89); mmm is in
minutes (between 000 and 999); a - is N (north) or S (south). The default is 00.000,N.
Configurable only if GPS Type set to None. Otherwise tit is read-only, displaying the value calculated by
the GPS receiver.
3.9.1.4 Altitude
The altitude in meters of the site in meters, from -300.0 to 9000.0. The default is 0.
Configurable only if GPS Type set to None. Otherwise it is read-only, displaying the value calculated by
the GPS receiver.
3.9.1.5 UTC Time and Date
The UTC (Coordinated Universal Time) date and time. Configurable only if the GPS Type is set to None.
Otherwise it is the read-only data received from the GPS receiver.
The format is hh: mm: ss,dd/mm/yyyy
hh (hours) between 0 and 23, mm (minutes) between 0 and 59, ss (seconds) between 0 and 59, dd/mm
with usual date and month rules, yyyy is the year.