User Manual
Table Of Contents
- System Manual
- BreezeCOMPACT
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Commissioning
- 2.1 Introduction
- 2.2 BreezeCOMPACT Installation
- 2.3 System Initial Verification
- 2.4 Configuring Parameters Required for Management Connectivity
- 2.4.1 Configuring the BTS Number
- 2.4.2 Configuring the Management Interface Connectivity Mode Parameter
- 2.4.3 Configuring the IP Interfaces Parameters
- 2.4.4 Configuring the L1 and L2 Parameters (if necessary)
- 2.4.5 Configuring the SNMP Authorized Manager and Traps Manager
- 2.4.6 Applying the Configuration
- 2.5 Activating the Unit
- Chapter 3 - Operation and Administration
BreezeCOMPACT System Manual
Chapter 3 - Operation and AdministrationBTS Menu
Chapter 3 - Operation and Administration BTS Menu
54
Update: Select this option to initiate a new process of restoring a configuration file from an external
TFTP server. You will be prompted to define the following parameters:
» File Name: The path to and file name of the file to be downloaded. A string comprising 1 to 254
characters.
» TFTP Server IP Address: The IP address of the TFTP Server from which the file should be loaded.
The default is 192.168.1.1 (same as the default for External Management IP Address).
» Start Download?: Select the download File option to initiate the process.
3.5.3.4.5 Restore From Local File
he Restore From Local File submenu includes the following options:
Show: Select this option to view the details of the last request for restoring a configuration file from
the unit’s memory. The displayed details include:
» Restore From Local Backup: noAction or restoretoRAM
» Local File Name
Update: Select this option to initiate a new process of restoring a local configuration file. You will be
prompted to define the following parameters:
» Restore From Local Backup: Select noAction or restoretoRAM. If you selected restoretoRAM,
you will be prompted to select the name of the local file.
» Local File Name: The name of the local backup file to be restored. A string comprising 1 to 30
characters. Must be the name of one of the existing backup file (see “Show Configuration Files”
on page 53).
3.5.3.5 TFTP Server
The TFTP Server option enables viewing or updating the TFTP Target IP Address, which is the IP address
of the TFTP server to be used for SW download. Typically the TFTP server is in the same station used for
management, and the TFTP Server IP address is identical to the External Management IP Address.
The default TFTP Target IP Address is 192.168.1.1 (same as the default for External Management IP
Address).
3.5.4 Management
The Management menu includes the following options:
SNMP Traps Managers
INFORMATION
To avoid loss of connectivity behind a router, the External Management parameters are not changed
when loading a Full backup file to the BTS. The values of these parameters configured in the target BTS
before the loading process, are maintained.