User Manual

BreezeCOMPACT System Manual
Chapter 3 - Operation and AdministrationBTS Menu
Chapter 3 - Operation and Administration BTS Menu
52
3.5.3.2.5 Set Running Version As Operational
When the BTS is running the Shadow version (after selecting Reset and Run from Shadow), it will boot
from the Operational version after the next reset. Select the Set Running Version As Operational option
if you want to swap versions so that the running version will become the Operational version and will be
the version to be used after reset. To avoid unintentional actions you will be prompted to confirm the
request.
3.5.3.3 ShutDown Operation
The ShutDown Operation submenu enables selecting one of the following options:
 reset: Select this option to reset the BTS. To avoid unintentional reset, you will be prompted to
confirm the reset request. Changes to some of the configurable parameters are applied only after
reset.
 resettoFactoryDefault: Select this option to restore the factory default configuration of all BTS
parameters. All parameters will revert to their default values after the next reset. To avoid
unintentional action, you will be prompted to confirm the request.
 noAction: Select this option to exit the Shutdown Operation submenu without any action.
 resettoFactoryDefaultwithConnectivity: Select this option to restore factory default configuration
without changing any of the parameters required for maintaining management connectivity to the
unit. To avoid unintentional action, you will be prompted to confirm the request.
The parameters that are maintained without any change include:
» BTS Number
» All IP Interfaces parameters
» All L1 & L2 parameters
» SNMP Traps Managers configurations
» Authorized Managers configurations
3.5.3.4 Configuration Files Control
The Configuration Files Control submenu enables viewing the backup configuration files that are
currently stored in the unit’s configuration backup directory, creating a backup file of the current BTS
configuration, managing the optional automatic mechanism for automatically creating backup files on a
daily basis, and downloading a configuration file to the BTS from either the internal configuration
backup directory or an external TFTP server.
NOTE!
Reset to default configuration may affect the ability for remote management of the unit.