User's Manual

BreezeCOMPACT System Manual
Chapter 3 - Operation and AdministrationThe Monitor Program
Chapter 3 - Operation and Administration The Monitor Program
36
 Common action options in menus associated with multiple entities objects are:
» Show All option, enabling to view main details of all existing entities.
» Add option, allowing to add a new entity. You will be prompted to configure all mandatory
parameters one by one. The new configuration will take effect only after completing the entire
configuration process for the relevant entity.
» Select option, enabling to select a specific entity (typically by its’ number). Common action
options for a selected entity (or for logic parameters group of a selected entity) are:
◊ Show option, enabling to view the current configuration of the applicable parameters. For
some objects some additional status information is displayed.
◊ Update option, allowing to update one or more parameters of the entity/group of
parameters. You will be prompted to configure all parameters one by one 9transaction mode
configuration). The current value is displayed for each parameter. To keep the current value -
press Enter. To change it - enter a new value and press Enter. The new configuration will take
effect only after completing the entire configuration process for the relevant entity/group of
parameters.
 Delete option, enabling deletion of the specific entity from the database.
 Press the Tab key for context sensitive help text (where applicable).
 If an erroneous value was entered - the reason of the error or help text will be displayed, and the
parameter entry text will be displayed again.
 If the Monitor program is not used for the period of time defined by the Monitor Inactivity Time-out
(see “Monitor Inactivity Timeout” on page 46), the session will be terminated automatically.
 Select the Exit option in the Main menu to exit the program and terminate the session.