User's Manual
Table Of Contents
- System Manual
- BreezeCOMPACT - Release 5.0
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Commissioning
- 2.1 Introduction
- 2.2 BreezeCOMPACT Installation
- 2.3 System Initial Verification
- 2.4 Configuring Parameters Required for Management Connectivity
- 2.4.1 Configuring the BTS Number
- 2.4.2 Configuring the Management Interface Connectivity Mode Parameter
- 2.4.3 Configuring the IP Interfaces Parameters
- 2.4.4 Configuring the L1 and L2 Parameters (if necessary)
- 2.4.5 Configuring the SNMP Authorized Manager and Traps Manager
- 2.4.6 Applying the Configuration
- 2.5 Activating the Unit
- Chapter 3 - Operation and Administration
BreezeCOMPACT System Manual
Chapter 1 - System DescriptionThe BreezeCOMPACT Solution
Chapter 1 - System Description The BreezeCOMPACT Solution
3
1.1.2 BreezeCOMPACT Models
BreezeCOMPACT Part numbers, Frequencies and Tx power
1.1.3 BreezeCOMPACT Product Topologies
BreezeCOMPACT starting from R5.0 supports 3 deployment topologies:
Single Sector, Single Carrier
Single Sector, Dual Carrier
Two Sector, Two Carriers (One Carrier per Sector)
P/N Product LTEBand Frequencies TxPower
perport
Ports
Rx/Tx
735270 CMP.XT‐BS‐3.4‐3.7 Band42+43(Low) 3400‐3700MHz 30 4x4
735272 CMP.XT‐BS‐3.3‐3.5 3300‐3500MHz 30 4x4
735273 CMP.XT‐BS‐3.6‐3.8 Band43 3600‐3800MHz 30 4x4
735271 CMP.HP‐BS‐3.5 Band42 3400‐3600MHz 37 4x2
725270 CMP3000‐B41‐2496‐2690MHz Band41 2496‐2690MHz 40 4x4