User's Manual
Table Of Contents
- System Manual
- BreezeCOMPACT - Release 5.0
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Commissioning
- 2.1 Introduction
- 2.2 BreezeCOMPACT Installation
- 2.3 System Initial Verification
- 2.4 Configuring Parameters Required for Management Connectivity
- 2.4.1 Configuring the BTS Number
- 2.4.2 Configuring the Management Interface Connectivity Mode Parameter
- 2.4.3 Configuring the IP Interfaces Parameters
- 2.4.4 Configuring the L1 and L2 Parameters (if necessary)
- 2.4.5 Configuring the SNMP Authorized Manager and Traps Manager
- 2.4.6 Applying the Configuration
- 2.5 Activating the Unit
- Chapter 3 - Operation and Administration
BreezeCOMPACT System Manual
Chapter 3 - Operation and AdministrationLoad Balancing
Chapter 3 - Operation and Administration Load Balancing
90
Now Sector 2 will connect all new CPEs till reaching equal number as Sector 1
Num ofMSperCarrier(M axim um )–Default30
Sector1–ActualNum berofMS(10 MS)
Sector2–ActualNum berofMS(0)
DifferencebetweenSector1&2=10
20MS
10MS
30MS
0MS
NumofMSperCarrier(Maximum)–Default30
Sector1–ActualNumberofMS(10MS)
Sector2–ActualNumberofMS(5MS)
20MS
10MS
30MS
0MS