TelPal Headset
FEATURE Highly clear communication, microphone anti-noise Headset comfortable & durable Convenient & useful headset bracket DTMF/FSK dual system, auto detection Headset volume switch Ringer volume Hi/Low/Off adjustable AC/DC Power not need Microphone work or not work adjustable, microphone indicator Incoming call auto-answer(need manual hang up) Flash time 100/600ms adjustable 30 items 16-digit incoming call records 5 items 16-digit outgoing calls records 1 group 32-digit auto IP c
Key function ①,LCD screen LCD screen will show default date after connecting line cord: LCD screen shows call numbers when there is incoming call: LCD screen shows talk time when off-hook. NEW: means there is unanswered new call or un-reviewed call when blinking. REP: means it's a repeat call when it shows at call records checking. ②, Function keys [SET] setting, can enter most functions setting by pressing this key.
[UP] page up [DOWN] page down [BRIGHT] LCD screen brightness adjust, LCD displays the corresponding variety of bright simultaneity when pressing this key. [PAUSE] call number will be dialed out after 3.6 seconds by pressing this key before dialing, to suit voice navigation system. [OUT] check recently dialed numbers [REDIAL] redial lately dialed numbers at off-hook state by pressing this key; redial LCD screen show numbers at on-hook state by pressing this key.
“CODE---”,press [SET] to enter setting, first“-”blinks(code number will show if local code was set, first local code number blinks).Press [UP] or [DOWN] to select the numbers from 0-9.Press [SET] to enter 2nd local code number setting after first local code number set, the rest can be done in the same manner.
distance calls when pressing [REDIAL] button. CHECKING THE OUTGOING CALL NUMBER Press [OUT] to enter and press [UP] or [DOWN] for up page and down page to check outgoing call numbers, time and date. Quick checking can be entered by pressing [UP] or [DOWN] for more than 3 seconds. Press [REDIAL] to redial the checking outgoing numbers. ON-HOOK PRE DIAL Press any desired numbers on on-hook state, press [DEL] to correct wrong digital, press [REDIAL] button after dialing finish.
