User's Manual

21
4.3.1 Disabling Encryption
To disable encryption, click the down arrow at the right of the Encryption field, select Disabled,
and click the Apply button.
4.3.2 Enabling Encryption
To enable encryption, click the down arrow at the right of the Encryption field, select either 64 bit
or 128 bit, and click the Apply button. After enabling an encryption method, you must then specify
encryption keys, as described in the following sections.
4.3.3 Creating Encryption Keys Using a Passphrase
To create encryption keys using a passphrase, click the radio button next to Create Key with
Passphrase and type a character string in the Passphrase field. As you type, the Configuration
Utility uses an algorithm to generate four keys used for encryption. After typing the character string,
click the Apply button.