User's Manual

19
The transmit rate can be set to:
• Fully Automatic – your card chooses the highest available rate providing reliable
communications based on the capabilities of the Access Point or station with which it
communicates and on the received signal quality
• Auto 1 or 2 Mb – allows only 1 and 2 Mb/s operation
• 5.5 Mb – allows only 5.5 Mb/s operation
• 11 Mb – allows only 11Mb/s operation
To change the Transmit Rate, click the down arrow at the right of the field, highlight the rate you
want to set, and click the Apply button.
Under most conditions, you should choose Fully Automatic as the transmit rate. In general, fixed
rates are used only in test environments.
4.2.5 Selecting the Peer-to-Peer Channel
When communicating in Peer-to-Peer type, you must specify a channel on which communications
will take place. To specify a channel, click the up or down arrow at the right of the Peer-to-Peer
Channel field until the channel you want to set appears, and then click the Apply button.