User's Manual

Wiring the EcoSwitch
EcoSwitch Installation Guide
Revision: 9
5
15. Turn the power on at the circuit breaker.
16. Press the switch once.
17. Verify the switch clicks and the light fixture turns on.
18. Press the switch once.
19. Verify the switch clicks and the light fixture turns off.
20. Turn the power off at the circuit breaker.
21. Mount the EcoSwitch into the junction box.
22. Mount the switch cover plate.
23. Turn the power on at the circuit breaker.
24. Wiring is complete. Complete either of the two following association sections depending on the
thermostat installed in the room.