User's Manual

Installation Requirements
EcoSwitch Installation Guide
Revision: 9
1
Installation Requirements
Required Equipment
 EcoSwitch (P/N: SS8030)
 Flathead screwdriver for mounting and unmounting wall plate
 Wire nuts
 Voltmeter
Electrical Requirements
Before installation, ensure that the EcoSwitch will be connected to a line with the following electrical
properties:
LINE Type
Alternating Current (AC)
LINE Voltage
120 Volts (V)
LINE Frequency
60 Hertz (Hz)
Before installation, ensure that the devices controlled by the EcoSwitch use less than the following maximum
loads:
Incandescent Load
600 Watts (W)
Motor Load
1/2 Horsepower (HP)
Resistive Load
1800 Watts (W)
15 Amperes (A)