User's Manual
Table Of Contents
Associating the EcoGuard with an EcoView Occupancy Sensor
EcoGuard Installation Guide
Revision: 6
9
Associating the EcoGuard with an EcoView Occupancy Sensor
1. Verify the EcoGuard and EcoView are powered.
2. Using the paperclip, press the pushbutton inside the EcoGuard’s pinhole once.
3. Verify the LED on the EcoGuard blinks red.
4. Using the paperclip, press the pushbutton inside the EcoView’s pinhole once.
5. Verify the LED on the EcoGuard returns to solid green. If it is solid red, see “Issues Associating the
EcoGuard with an EcoView Occupancy Sensor” on page 10.
6. Association is complete.