User's Manual

Associating the EcoGuard with an EcoWave (EcoAir + EcoSource)
EcoGuard Installation Guide
Revision: 6
8
5. Assign a unique installer number by pushing the up or down arrows. The number at the bottom of the
screen will increase or decrease.
6. Press the “On/Off” button again to activate Learn Mode. The text “On” should appear next to the
bottom number. See Figure 4.
Figure 7: Maintenance -> Learn Menu with 1 Device Associated, In Learn Mode
7. Using the paperclip, press the pushbutton inside the EcoGuard’s pinhole once.
8. Verify the LED on the EcoGuard blinks red a number of times equal to your unique installer number
from step 5.
9. Verify the LED on the EcoGuard returns to solid green. If it is solid red, see “Issues Associating the
EcoGuard with an EcoInsight or EcoWave” on page 10.
10. Verify the number in the center of the EcoAir “Learn” menu has increased by one.
11. Press the Fan button on the EcoAir twice to exit out of the Maintenance Menu.
12. Association is complete.