User's Manual

Associating the EcoGuard with an EcoWave (EcoAir + EcoSource)
EcoGuard Installation Guide
Revision: 6
7
Associating the EcoGuard with an EcoWave (EcoAir + EcoSource)
1. Verify the EcoGuard, EcoSource, and EcoAir are powered.
2. Press and hold the “Fan” button on the EcoAir for 10 seconds, then press the “On/Off” button. The
Maintenance Menu should appear.
3. Verify the text “Learn” appears in the Maintenance Menu.
4. Press the “On/Off” button to enter the Learn menu. Either one or two numbers will appear in the
center of the screen, depending on the number of devices associated with the EcoSource. See Figure 5
and Figure 6.
Figure 5: Maintenance -> Learn Menu with 0 Devices Associated
Figure 6: Maintenance -> Learn Menu with 1 Device Associated