User's Manual

EcoSmart VRF Controller: Part of the EcoWave Remote
Thermostat/Controller Package
EcoSmart VRF Controller
I, O & M Guide
Telkonet, Inc.
For Use with Firmware Version 2.x
20800 Swenson Drive, Suite 175
EcoSmart VRF Controller: Part of the EcoWave
Remote Thermostat/Controller Package
Waukesha, WI 53186
Revision 2.3
[phone]
Page 5 www.telkonet.com
EcoSmart VRF Controller: Part of the EcoWave Remote Thermostat/Controller Package
The EcoWave package is comprised of two hardware components as shown below. Together they form a
wireless programmable controllable thermostat. With software-based relay control and fan speed
configuration, programming setup is simple and fast.
EcoTouch+ (or EcoAir)
 Display unit
 Place in optimum location for occupancy detection,
temperature measurement and ease of occupant use
EcoSmart VRF Controller
 HVAC Controller
 Install in or on HVAC unit
 Accepts association with 15 total compatible wireless devices
 Each compatible wireless device can be associated to
multiple EcoSmart VRF Controllers
Accomodates a Variety of Configurations
The EcoWave Package can be configured for many different HVAC scenarios. For example:
.
One EcoTouch+ (or EcoAir) can
control multiple HVAC systems,
each equipped with an EcoSource
VRF, but all directed by a single
EcoTouch+ (or EcoAir) display
unit. This type of installation
reduces the complexity of running
multiple HVAC units in a single
large space and eliminating the
potential of opposing modes
forcing equipment to compete
against each other.