User's Manual

EcoSource Low Voltage Installation
Step 23 Determine which end of the adapter should be situated on top, and which end should be
situated on the bottom. As shown in Figure 16, the notch in the main display should be in the
upper left corner, and the smaller, vertical rectangle should be in the lower right corner.
Figure 16: Determine Top & Bottom of Plate
Step 24 Mount the Telkonet JBOX adapter plate to the mud ring with two #6-32 1” screws. See Figure
17.
Figure 17: JBOX, Mud Ring & Adapter Plate
Step 25 Mount SS6000 backplate on top of JBOX adapter, using four #5 ½” coarse thread screws. See
Figure 18.
EcoWave Featuring EcoTouch IO&M Guide Telkonet, Inc.
For Use with Firmware Version 2.x 20800 Swenson Drive, Suite 175
EcoSour ce Waukesha, WI 53186
Revision 2 [phone]
Page 17 www.telkonet.com