User's Manual

EcoContact+ IOM Guide Telkonet, Inc.
For Use With Firmware V. 2.x 20800 Swenson Drive, Suite 175
EcoContact+ Explained Waukesha, WI 53186
Revision 4 [phone]
Page 3 www.telkonet.com
EcoContact+Explained
The EcoContact+ uses a magnetic contact to detect occupancy. It recognizes when entry doors, patio doors and
windows open and close. It then transmits this data to the thermostat, which is programmed to act
accordingly, in the manner that has been defined by the property and configured for the room.
The EcoContact+ requires an EcoCommander EGS 4.5 (not 4.0).
Components
The EcoContact+ consists of two components: a sensor and a magnet. One component is installed on the
door/window and the other is installed on the door/window frame, or vice versa. (In this guide, any reference
to “door” will mean “door and/or window”.)
Each EcoContact+ set includes:
1. One EcoContact+ sensor
2. One magnet (or magnet set if in-door)
Your magnet
was selected during the order phase of your project, based on the door and frame design
(material, size, etc.).
1
1
Telkonet is not responsible for any door warranty that may be voided when our product is inserted in or on a door or frame.