User's Manual

EcoContact+ IOM Guide Telkonet, Inc.
For Use With Firmware V. 2.x 20800 Swenson Drive, Suite 175
The EcoSmart Energy Management System Waukesha, WI 53186
Revision 4 [phone]
Page 2 www.telkonet.com
ConventionsUsedinthisGuide
This is an informational tip, used to
convey relevant but not necessarily
urgent information.
This is a warning, used to convey
important information.
This is a strong warning, used to convey
urgent and often safety-related
information.
Chapter Names
Main chapters in this manual will have headings in large
green font as shown above. Main chapter names also
appear in the footer.
Sub-Chapter Names
Within the main chapters will be relevant sub-chapters,
which are presented with bold, black headings as shown
above.
Footers
Footers contain the document name, chapter name,
document version number and page number, as shown
here:
Procedure: Steps Described Here
Procedural Steps are indicated as such in the heading,
which begins with the word, “Procedure:” as shown
above. The steps are outlined as shown in the following
example:
Step 1 Navigate to the Config Menu >
Alert Setup.
Step 2 Click the Add New Alert Trigger
button in the top left corner of
the Alert Setup Screen.
Step 3 Enter a descriptive Alert Name.
Introducing a New Screen
When a screen is introduced, a screen print is provided.
Below the screen print will be its location and an
explanation of the screen’s intended purpose as shown in
this example:
Screen and Ta
b Names
Screen and Tab names are underlined, as shown in this
example:
The Thermostat Status Screen shows all rooms
and their status information at a glance.
Field Names
Field names appear in bold font; field explanations
appear next to the field name as shown in this example:
Device Select the device type.
Position The order in which attached
devices are associated.
MAC Address MAC address of the attached
device.
Field Selection Choices
Field selection choices are in italics as shown in this
example:
Select the Alerting Device Type from the
dropdown menu. Choices are: All Thermostats,
All Pipe Sensors, Single Device and Outdoor
Temperature.
Tables provide visual presentations of related data such
as hardware components and explanations as shown in
this example:
Pin
Label on
Backplate
Function
1
iaculis Lorem ipsum dolor sit
2
velit
Fusce pharetra risus eu
3
sagittis Uisque laoreet augue eu
Troubleshooting
Assistance with troubleshooting begins with the red
“Troubleshooting” header as shown above.