User's Manual

High Voltage Installation (Non-Class 2)
EcoInsight+ SS6010 I, O & M Guide Telkonet, Inc.
For Use with Firmware Version 2.x 20800 Swenson Drive, Suite 175
High Voltage Installation (Non-Class 2) Waukesha, WI 53186
Revision 2.1 [phone]
Page 9 www.telkonet.com
Figure 3: JBOX, Mud Ring, Adapter Plate
10. Remove the safety screw from the left side of the SS6010 using the hex wrench. See Figure 4.
Figure 4: Thermostat Side View
11. Separate the high voltage back plate from the thermostat: use a flathead screwdriver to GENTLY press
the tab next to the screw hole to allow the thermostat to pop open. WARNING: Using too much force
can break the tab.
Safety Screw
Tab