User's Manual

EcoView/EcoContact Telkonet, Inc.
Installation Guide 10200 W. Innovation Dr., Suite 300
Configuration Milwaukee, WI 53226
Revision 1 [phone]
Page 5 www.telkonet.com
Associating an EcoView/EcoContact with an EcoSource
1. Verify the EcoView or EcoContact, the EcoSource, and the EcoAir are powered.
2. Press and hold the “Fan” button on the EcoAir for 10 seconds, then press the “On/Off” button. The
Maintenance Menu should appear.
3. Verify the text “Learn” appears in the Maintenance Menu.
4. Press the “On/Off” button to enter the Learn menu. Two numbers will appear in the center of the
screen. See Figure 4.
Figure 4: Maintenance → Learn Menu with 1 Device Associated
5. Assign a unique installer number by pushing the up or down arrows. The smaller number on the screen
will increase or decrease.
6. Press the “On/Off” button again to activate Learn Mode. The text “On” should appear next to the
smaller number. See Figure 5.
Figure 5: Maintenance → Learn Menu with 1 Device Associated, In Learn Mode