User's Manual

EcoView/EcoContact Telkonet, Inc.
Installation Guide 10200 W. Innovation Dr., Suite 300
Configuration Milwaukee, WI 53226
Revision 1 [phone]
Page 4 www.telkonet.com
5. Assign a unique installer number by pushing the up or down arrows. The smaller number on the screen
will increase or decrease.
6. Press the “On/Off” button again to activate Learn Mode. The text “On” should appear next to the
smaller number. See Figure 3.
Figure 3: Maintenance → Learn Menu with 1 Device Associated, In Learn Mode
7. Using the paperclip, press the pushbutton inside the EcoView’s/EcoContact’s pinhole once.
8. Verify the front of the EcoView/EcoContact blinks a number of times equal to the unique installer
number you chose in step 5.
9. Verify the larger number in the EcoInsight “Learn” menu has increased by one.
10. Press the Fan button on the EcoInsight twice to exit out of the Maintenance Menu.
11. Association is complete.