Datasheet

Product Description
Enabling a new generation of massive low-cost IoT device
deployments numbering in the hundreds of thousands or
millions, the ME910G1 is the Category M1/NB2 evolution
of the brand new Telit xE910 product family. Exceeding
market demands for optimized power consumption and
enhanced quality of coverage, Cat M1/NB2 devices are
specifically tailored for low data throughput IoT applica-
tions. This model further enriches the widely deployed Telit
xE910 family of 28 x 28 mm LGA modules.
Compliant with 3GPP Release 14, the ME910G1 LTE UE
CatM1/NB2 module enables increased power saving for IoT
applications using Power Saving Mode (PSM) and extended
Discontinuous Reception (eDRX), allowing devices to wake
up periodically, delivering only the smallest amounts of
data necessary before returning to sleep mode. Enhanced
coverage, enabled by maximum coupling loss (MCL) of up
to +15dB/+20dB, provides superior in-building penetra-
tion compared to earlier cellular LTE standards. LTE
CatM1/NB2 devices are optimized in cost, size and power
consumption compared to higher UE categories. 3GPP
Release 14 further improves these features by adding
techniques to increase the date rate for LTE-M and NB-IoT.
These advantages make the ME910G1 ideal for enabling
quick implementation of LTE technology where low cost
and low power are more relevant than high speed.
The ME910G1 series enables OEMs and enterprise to eas-
ily create regional variants for application such as smart
metering, security & surveillance, point of sales, health
monitoring, fleet management, asset tracking and wear-
able devices. The ME910G1 series is offered with global
frequency bands configuration for global deployment. It
supports dual mode Cat M1/NB2 (NB-IoT) capability and 2G
fallback. The ME910G1 series is highly recommended for
new designs and is also ideal as a migration path for exist-
ing GPRS or CDMA devices. Both brand-new and updated
designs benefit from a significant extension in life cycle
with LTE Cat M1/NB2.
Key Benets
• Design once and deploy globally with the xE910 form
factory family
• Ideal solution for global IoT applications such as smart
metering, security & surveillance, point of sales, health
monitoring, fleet management, asset tracking and
wearable devices
• Compliant to 3GPP Release 14 Cat M1/NB2, tailored for
IoT devices
Family Concept
The ME910G1 is a member of Telit’s agship xE910 module
family delivering 4G radio access technology in the 28.2 x
28.2 x 2.2mm family form factor. The Telit xE910 Uni-
ed Form Factor Family is comprised of 2G, 3G, and 4G
variants that are 3GPP and 3GPP2 products sharing a com-
mon form factor as well as electrical and programming
interfaces which allows developers to implement a “design
once, use anywhere” strategy.
Connecting the world
from the inside out
1
AVAILABLE
WORLDWIDE
LTE Cat M1/NB2
Embedded
ME910G1 Series
28.2 mm
2.2 mm
28.2 mm