User's Manual
Table Of Contents
- 1 Introduction
- 2 General Product Description
- 3 Application Interface
- 3.1 Power Supply
- 3.2 Reset
- 3.3 Serial Interface
- 3.4 GPIO Interface
- 3.5 I2C Interface 0F
- 3.6 SPI Serial Peripheral Interface
- 3.7 Bluetooth Radio Interface
- 1.1
- 3.8 NFC Function
- 3.9 Slow Clock Interface
- 3.10 Test Mode
- 3.11 Operating in a Power-Switched Environment
- 3.12 Serial Wire Debug Interface
- 3.13 DC/DC Converter
- 4 Module Pins
- 5 Electrical Characteristics
- 6 Mechanical Characteristics
- 7 Application Diagram
- 8 Compliances
- 9 Packing
- 10 Ordering Information
- 11 Safety Recommendations
- 12 Document History
BlueMod+S42 Hardware User Guide
1VV0301303 Rev.3 – 2016-08-22
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 60 of 62
10 Ordering Information
10.1 Part Numbers
BlueMod+S42 is available in the following variants:
Name Antenna Firmware
Version
Order No. MOQ /
units
Comments
BlueMod+S42/AI/Central Internal 53346-xx tbd
BlueEva+S42/Central Internal 2.xxx 53352-xx 1 Evaluation Kit
Other variants on request, please contact Telit sales department.
10.2 Standard Packing Unit
The standard packing units are 1000 pieces on Tape and Reel
10.3 Evaluation Kit
The kit BlueEva+S42 is available to evaluate functionality and start your firmware
implementation.