User's Manual

BlueMod+S42 Hardware User Guide
1VV0301303 Rev.3 – 2016-08-22
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 44 of 62
5.6 RF Performance
5.6.1 BLE Receiver
VSUP = 1,7V to 3,6V, T
amb
= +20°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver
Frequency
[GHz]
Min Typ Max
BT
Spec
Unit
Sensitivity at 30,8% PER
2,402 -92,5 -70
≤ -70 dBm
2,440 -93,0 -70
2,480 -93,5 -70
Reported PER during PER
report integrity test
2,426 50 50 65,4
50
< PER
< 65,4
%
Maximum received signal at 30,8% PER -10 0 ≥ -10 dBm
Continuous power required to
block Bluetooth reception at
-67dBm with 0,1% BER
0,030 – 2,000 -30 -30
dBm
2,000 – 2,400 -35 -35
2,500 – 3,000 -35 -35
3,000 – 12,75 -30 -30
C/I co-channel 10 21 ≤21 dB
Adjacent channel
Selectivity C/I
F = F0 + 1 MHz 1 15 ≤15 dB
F = F0 - 1 MHz 1 15 ≤15 dB
F = F0 + 2 MHz -25 -17 ≤-17 dB
F = F0 - 2 MHz -25 -15 ≤-15 dB
F = F0 + 3 MHz -51 -27 ≤-27 dB
F = F0 - 5 MHz -51 -27 ≤-27 dB
F = Fimage -30 -9 ≤-9 dB
Maximum level of intermodulation interferers -50 -36 ≥-50 dBm
VSUP = 1,7V to 3,6V, T
amb
= -40°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver Frequency
[GHz]
Min Typ Max BT
Spec
Unit
Sensitivity at 30,8% PER
2,402 -93,0 -70
≤ - 70 dBm
2,440 -93,5 -70
2,480 -94,0 -70
VSUP = 1,7V to 3,6V, T
amb
= +85°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver
Frequency
[GHz]
Min Typ Max
BT
Spec
Unit
Sensitivity at 30,8% PER
2,402 -93,0 -70
≤ . 70 dBm
2,440 -93,5 -70
2,480 -94,0 -70
Table 17: RF Performance BLE Receiver