User's Manual

BlueMod+S/AI
www.stollmann.de Page 26 of 52
5 Electrical Characteristics
5.1 Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage
to the device. These are stress ratings only, and functional operation of the device at these or any
other conditions beyond those indicated under “Electrical Requirements” is not implied. Exposure
to absolute-maximum-rated conditions for extended periods may affect device reliability.
Item Symbol Absolute Maximum Ratings Unit
Supply voltage VSUP -0,3 to +3,6 V
Voltage on any pin V
Pin
-0,3 to VSUP+0,3 V
Injected current into
any GPIO pin
Max. per package
I
INJ
I
INJ_package
40
100
mA
mA
Table 7: Absolute Maximum Ratings
5.2 Electrical Requirements
VSUP = 3,3V, T
amb
= 25°C if nothing else stated
Item Condition Limit Unit
Min Typ Max
Frequency Range 2400 2483.5 MHz
Load impedance
Measured with network
analyzer in the frequency
range at antenna pin
50 Ohm
Output return loss
Receive Mode to 50Ω load
Transmit Mode to 50Ω load
-10
-10
dB
Table 8: Electrical Requirements
5.3 Operating Conditions
T
amb
= 25°C
Item Condition Limit Unit
Min Typ Max
Supply voltage VSUP
normal mode (DC/DC not enabled)
1,8 3,0 3,6 V
DC
Table 9: DC Operating Conditions