User's Manual
Table Of Contents
- Introduction
- Block Diagram
- Application Interface
- Pin Description
- Electrical Characteristics
- Mechanical Characteristics
- Approvals/Certifications
- Related Documents
- Ordering Information
- History
BlueMod+C11/G2
Hardware Reference
www.stollmann.de Page 35 of 42
When placing the BlueMod+C11/G2 at the right edge of the PCB ensure that the
restricted area on the target PCB is free of planes, traces and parts.
acceptable, but not optimal placement
When placing the BlueMod+C11/G2 on other positions than the right side the com-
plete restricted area should be kept free of planes, traces and parts.
6.7 Safety Guidelines
According to SAR regulation EN 50371-2002 the BlueMod+C11/G2 is not intended
to be used in close proximity to the human body. Please refer to above-mentioned
regulation for more specific information.
In respect to the safety regulation EN 60950-1: 2001 all conductive parts of the Blu-
eMod+C11 are to be classified as SELV circuitry. OEM’s implementing the Blu-
eMod+C11/G2 in their products should follow the isolation rules given in regulation
EN 60950-1: 2001.
The PCB material of the BlueMod+C11/G2 is classified UL-94V0.