User's Manual

BlueMod+C11/G2
Hardware Reference
www.stollmann.de Page 28 of 42
5.6 Power-up Time
The time until the BlueMod+C11/G2 is able to accept link requests or serial data is
about 4 seconds after power-up. This time can be reduced to approx. 1.5 seconds
by parameter change.
5.7 Wake-up Time
The time until the BlueMod+C11/G2 is able to process commands coming from a
sleep state / deep sleep state.
DTR


CTS


RX




180 ms (Deep sleep state) 

120 us (Sleep state)
The module processes commands after 180ms coming from deep sleep state and
accordingly after 120us coming from sleep (power-down) state.
Serial commands can be sent directly after CTS is active(low).