User's Manual

5
•(SSeries)In2Dimaging,clickSetupon
theverticalrowofcontrolkeys,andthen
clickUSB Devices.
Setupmaynotbeonthefirstpage.
4 OntheUSBDevicessetuppage,select
Bluetooth.
Bluetoothisavailableaboutaminuteafter
youinserttheBluetoothUSBadapter.
5 Turnontheremotecontrol.
(See“Turningon
powerandchargingthebattery”onpage 3.)
TheBluetoothindicatorblinksfast.
6 Simultaneouslypress and onthe
remotecontroluntilthebeep,andthen
release.
TheBluetoothindicatorblinksslowly.
7 SelectSearchinthelowerlefthandcornerof
theultrasoundsystemscreen.
TheultrasoundsystemsearchesforBluetooth
devices.
Theprocesscantakeseveralminutes.
8 Selecttheremotecontrol(BlueHID ##:##)in
theBluetooth Deviceslist,andthenselect
Connectatthebottomofthescreen.
IntheBluetoothDeviceslist,theremote
control’sstatuschangestoConnected.
To disconnect the remote control
1 Ontheultrasoundsystem’sUSB Devices
setuppage,sele ctBluetooth.(See“Todisplay
theUSBDevicessetuppage”onpage 1.)
2 Selecttheremotecontrol(BlueHID ##:##)in
theBluetooth Deviceslist,andthenselect
Disconnect atthebottomofthescreen.
IfDisconnectisnotavailable,selectSearch,
andthenselectDisconnect.
Note: On
theUSB Devicessetuppage,the
connectedremotecontrolislistedtwice:asRemote
andasKeyboard.
Controlling the ultrasound
system
Youcancontroltheultrasoundsystemby
pressingthesixbuttonsontheremotecontrolor
usingsixvoicecommands.
Buttons
Thebuttonsontheremotecontrolperformthe
followingcommands.
Seealso“Reviewingthecinebuffer”onpage 7.
Iftheremotecontrolisconnected,youcanpress
thebuttons,evenifthemicrophoneisconnected.
Decreases the depth
Increases the depth
Increases the gain (live image)
Reviews the cine buffer (frozen image)
Decreases the gain (live image)
Reviews the cine buffer (frozen image)
Freezes (or unfreezes) the image
Saves the image