User Instructions

Stollmann
E + V GmbH
BlueRS+I
DesignGuide
Author: cl Date of Savin
g
: 19.03.04 Ref: Revision: 1.2 Pa
g
e 9 of 22
4.2 Autoconnect
In case the end device cannot be programmed on the Bluetooth AT Commands or
BlueRS+I should be in fixed operation with another Bluetooth device, the BlueRS+I
Autoconnect can be configured.
Several triggers (i.e. DTR active) may be defined which introduce the scanning
process of the environment and the connection setup with particular Bluetooth
devices.
BlueRS+I then behaves at the interface as a serial cable which is plugged in by
establishing the Bluetooth connection. In case the Bluetooth connection is not being
built up, BlueRS+I is comparable to an unplugged cable.
Trigger Function Parameter
DTR active Bluetooth Connect Bluetooth Address
Power On Bluetooth Connect Bluetooth Address
Transmit data activity Bluetooth Connect Bluetooth Address
Bluetooth link request
(incoming)
accept Bluetooth link none
4.3 Security
Security features are controlled via special AT-commands
brestr defines security level for all incomming BT-links
bcrypt enables/disables data encyption on BT-link
Please refer to the manual for detailed information.