User Instructions

Stollmann
E + V GmbH
BlueRS+I
DesignGuide
Author: cl Date of Savin
g
: 19.03.04 Ref: Revision: 1.2 Pa
g
e 18 of 22
The mother board should have no ground plane under the BlueRS+I to allow best
radiation.
Furthermore there must be a space of at least 15 mm in each direction from the
antenna free from wire, circuits and conductive material.
It must be ensured that the antenna is not co-located or operating in conjunction
with any other antenna or transmitter.
When using an external Antenna the antenna is fixed and connot be removed or
replaced by the enduser.
For detailed consulting on integration please contact Stollmann.
6.2 Housing Guidelines
The individual case must be checked to decide whether a specific housing is
suitable for the use of the internal antenna. A plastic housing must at least fulfill the
following requirements:
• Non-conductive material, non-RF-blocking plastics
• No metallic coating
• ABS is suggested
Spared Ground Plane
Spared Ground Plane
BlueRS+I
BlueRS+I
BlueRS+I
Mother Board
Mother Board
Mother Board
Space 13 mm
Space 13 mm
Space 10 mm