User's Manual

1.07work/09.2003 BlueRS+ manual

1. Introduction

1 Introduction

We are very pleased to see that you have bought a Stollmann product and would like

to express our appreciation.

This documentation is valid for the following models of the BlueRS+C2 product

family

• BlueRS+C2-MF5 (plug on module, antenna internal, 5V DC)

• BlueRS+C2-MF3 (plug on module, antenna internal, 3.3V DC) on request

• BlueRS+C2-MS5 (plug on module, antenna external, 5V DC) on request

• BlueRS+C2-MS3 (plug on module, antenna external, 3.3V DC) on request

• BlueRS+C2-DF (desktop model, antenna internal)

• BlueRS+C2-DS (desktop model, antenna external) on request

• Software versions V1.124.003 or later

1.1 Product description

The BlueRS+C2 is an Bluetooth adapter with the following functions.

• The BlueRS+C2 connects devices with a serial port to any Bluetooth link. It

gives access to other devices situated in the same Bluetooth area (piconet).

• Data can be transmitted with the following rates:

- limited by the baudrate of the serial link from 1200 up to 230400 baud.

• The connected serial device can drive the BlueRS+C2 by using

- asynchronous AT commands

- automatic connection setup

The following profiles are supported:

• One serial profile for transparent data communication through the Bluetooth link.

• A second serial profile for management access from another Bluetooth device

using a Bluetooth link.

BlueRS+C2 may be used in two product versions:

• The BlueRS+C2 module may be integrated into different devices and connects

them with the Bluetooth interface via a serial TTL/CMOS compatible interface.

These modules are referenced as BlueRS+C2-Mxx in this document and

represents the product types BlueRS+C2-MF5, BlueRS+C2-MF3, BlueRS+C2-

MS5, BlueRS+C2-MS3.

• The BlueRS+C2 Desktop device is an external device that connects the terminal

equipment with the Bluetooth interface via a serial V.24 / RS-232 interface.