User's Manual

BlueRS+ manual 1.07work/09.2003
4. BlueRS+C2 Configurator command set
32 © Stollmann Entwicklungs- und Vertriebs-GmbH
load Load stored parameter setting
All parameters stored in non volatile ram will be loaded.
opt option register for AT register
option register representing the setting of some AT commands:
bit 0: 1 = echo on, equals ATE1
bit 1: 1 = quiet, equals ATQ1
bit 2: 1 = numeric response, equals ATV0
prty asynchronous parity
Parity of asynchronous character (default: no parity)
0 : No parity; 1 : Odd parity; 2 : Even parity, 3 : space parity, 4 : mark parity
Note: To use other data formats than 10 bit (8N1, 7E1, 7O1) you have to set br to
fixed speed.
quit, exit, go activate parameter changes
Activates the actual parameter settings and leave the BlueRS+C2Configurator
(without storing the parameter in non volatile memory ).
reset reset BlueRS+C2
Resets the whole functionality of the BlueRS+C2 by a forced hardware reset
(like Power off / on).
Refer also to parameter rsttim.
rsttim startup timer
Startup delay timer after reset. Within this period the configuration can be
entered after reset.
1 .. 255 : reset phase in 100 milliseconds, default: 40 (4 seconds)