User's Manual

1.07work/09.2003 BlueRS+ manual

4. BlueRS+C2 Configurator command set

ccts CTS control

CTS control

0 : CTS follows RTS

1 : CTS always ON (default)

2 : CTS follows DTR

3 : CTS follows remote CTS line status

cdcd DCD control

DCD control

0 : DCD always ON

1 : DCD indicates a Bluetooth connection (default)

2 : follows DTR

4 : follows remote DCD

cdsr DSR control

DSR control

0 : DSR always ON (default)

1 : DSR indicates a Bluetooth connection

2 : DSR follows DTR line status

3 : DSR follows DCD line status

4 : DSR follows remote DSR line status

cdtr DTR control

Usage of DTR to control a Bluetooth connection

0 : No control:

Incoming calls will be accepted independent of DTR status;

DTR drop does not disconnect an active connection.

2 : DTR off disconnects

Incoming calls will be accepted only when DTR is ON;

DTR drop disconnects an active connection.

4 : DTR ignore and DTR drop disconnects (default)

Incoming calls will be accepted independent of DTR status;

DTR drop disconnects an active connection.