User's Manual

BlueRS+ manual 1.07work/09.2003
4. BlueRS+C2 Configurator command set
28 © Stollmann Entwicklungs- und Vertriebs-GmbH
Set the Pin for setting up a connection in restricted mode.
br baudrate asynchronous
Selection of the asynchronous baudrate for the DTE interface
1: 1200 bit/s
2: 2400 bit/s
3: 4800 bit/s
4: 9600 bit/s
5: 19200 bit/s
6: 38400 bit/s
7: 57600 bit/s
8: 115200 bit/s (default)
9: 230400 bit/s
20: 300 bit/s
21: 600 bit/s
brad Bluetooth Device Remote Address
With this command you can setup the Bluetooth address of the other Bluetooth
device, that should be connected using an automatic link setup.
Example:
brad=0080371443AB
brestr Set restricted mode
Enable and disable the restricted mode with exchanging the Pin (Passkey).
cato call timeout to abort
Time to abort a call if not successful connected after n seconds.
n = {3..255}, default: 15 seconds.
capa call pause
Automatic call: set a call pause for n seconds before next call attempt.
n = 0 : no call retry, default: 3 seconds.