User's Manual

BlueRS+ manual 1.07work/09.2003
4. BlueRS+C2 Configurator command set
26 © Stollmann Entwicklungs- und Vertriebs-GmbH
BlueRS+C2Configurator with the command "show<↵>".
If necessary the remote BlueRS+C2 can be reset using the command
"reset<↵>".
• Hang up the Bluetooth connection by leaving the BlueRS+C2Configurator
using the command quit.
Leave your terminal program. After the next reset the changes will be active.
• Restore the server channel to the desired value, default to 1 (brsch=1).
Now the configured remote BlueRS+C2 with the new set of parameters can be used
by running the needed PC program.