User's Manual

BlueRS+ manual 1.07work/09.2003
3. Using the BlueRS+C2
18 © Stollmann Entwicklungs- und Vertriebs-GmbH
device during a Service Discovery sequence It is a string constant according
to V.250.
Example: at**bname show own device name
at**bname=<rs+name> set own device name to rs+name
**BRAD Bluetooth Device Remote Address
With this command you can setup the Bluetooth address of the other Bluetooth
device, that should be connected using an automatic link setup.
Example:
AT**BRAD=0080371443AB
**BRNAME Displays connected device name
Displays the device name of the connected Bluetooth device.
This value is can not be changed.
Example: at**brname show connected device name
**BRSCH Set remote Bluetooth server channel
Set up server channel of the remote Bluetooth module, to that the Bluetooth
link shall be established.
The own server channel number is fixed to 1, only used for accepting
Bluetooth links.
Remote management between BlueRS+C2 is achieved using the server
channel 30.
default: 1
Example: at**brsch=1
**BSNAME BlueRS+C2 service name
Defines the service name of the BlueRS+C2. bsname is shown on a remote
Bluetooth terminal device during a Service Discovery sequence.
Example: at**bsname
at**bsname=<rs+srvname> set own device name to rs+srvname