User's Manual

1.07work/09.2003 BlueRS+ manual

3. Using the BlueRS+C2

Response: OK

**BDLIST Show inquired Bluetooth devices

With this request the list of found Bluetooth devices will be returned, the

entries show the Bluetooth device address and the Bluetooth device name

requested by the command at**bdinq. For every Bluetooth device in addition

the available services (profiles) will be shown.

These entries can be accessed by the selectors d1 .. dn to address the

Bluetooth device and the selectors s1 .. sn to address the Bluetooth devices

service channel.

Example: at**bdlist

Responses: d1: <bradr1>, <bname1>

s1: <service1>, <server channel>, <bsname1>

s2: <service2>, <server channel>, <bsname2>

d2: <badr2>, <bname2>

s1: <service1>, <server channel>, <bsname3>

inquire active ; if the search initiated by at**bdinq

OK ; is still active

list empty ; no Bluetooth device found

brad found Bluetooth remote device address (12 digits)

bname found Bluetooth remote device name

service coding of service type

server channel used channel number for service type

**BINQTIM Timeout for Inquiry Scan

With this command the Inquiry Scan time will be limited to the configured

value (default: 8 = 10 seconds). See also command at**bdinq.

Allowed values: 1 to 48 (1,25 sec to 60 sec).

Example: at**binqtim=n set maximum wait time to n * 1.25 seconds

at**binqtim=2 set maximum wait time to 2.5 seconds

**BNAME BlueRS+C2 own device name

Defines the device name. bname is shown on a remote Bluetooth terminal