User's Manual

BlueRS+ manual 1.07work/09.2003
3. Using the BlueRS+C2
14 © Stollmann Entwicklungs- und Vertriebs-GmbH
V Result format
ATV Result is presented as numbers (followed by <↵>)
ATV1 Result is presented as text (default)
&V Display configuration
AT&V Displays the actual configuration of AT command setting
AT&V1 Displays the actual configuration of extended AT command
setting
W Extended result codes
ATW Result is presented without extended result codes.
ATW1 Result is presented with extended result codes, Result
messages include error causes.
&W Store active configuration
The active configuration will be stored in non volatile memory.
AT&W
Z Load stored settings
The active configuration will be reset to the stored configuration.
Must be the last command in an AT command line.
ATZ
**DBITS Number of data bits x asynchronous chars (7,8)
Number of data bits x for asynchronous character (7,default: 8).
AT**DBITS=x
Note: only valid for br <> 0.
**PRTY Set parity of asynchronous characters
Selects the parity for asynchronous characters.