User's Manual

Stollmann
E + V GmbH
BlueMod+B20
Hardware reference
Author: bg Date of Saving: 28.03.07 Ref: BlueMod+B20_HWreference_V101.doc Revision: 1.00 Page 30 of 30
The radiated output power of BlueMod+B20 is far below the FCC radio frequency
exposure limits. Nevertheless, the BlueMod+B20 shall be used in such a manner,
that the potential for human contact during normal operation is minimized.
8.1.1.4 RF-exposure Statement
The radiated output power of BlueMod+B20 is far below the FCC radio frequency
exposure limits. Nevertheless, the BlueMod+B20 shall be used in such a manner
that the potential for human body contact during normal operation is minimized.
Any notification to the end user of installation or removal instructions about the inte-
grated radio module is not allowed.
8.1.1.5 Labeling requirements for the End Product
Any End Product integrating the BlueMod+B20 must be labelled with at least the
following information:
This device contains transmitter with
FCC-ID: RFR-B2029
8.2 Bluetooth Qualification
The BlueMod+B20 is a qualified design according to the Bluetooth Qualification Pro-
gram Reference Document (PRD) V2.0. The Qualified Design ID (QDID) is:
B011904
For further information about marking requirements of your product attention should
be paid the Bluetooth Product Marking Guide at
https://programs.bluetooth.org/Download/Marking_Guide_20060601.pdf