User's Manual

Stollmann

E + V GmbH

BlueMod+B20

Hardware reference

Author: bg Date of Saving: 28.03.07 Ref: BlueMod+B20_HWreference_V101.doc Revision: 1.00 Page 2 of 2

Note

This device was developed for the purpose of communication in an office environ-

ment. It is intended solely for our industrial clients for physical integration into their

own technical products after careful examination by experienced technical personnel

for its suitability for the intended purpose. The device was not developed for or in-

tended for use in any specific customer application. The firmware of the device may

have to be adapted to the specific intended modalities of use or even replaced by

other firmware in order to ensure flawless function in the respective areas of applica-

tion. Performance data (range, power requirements, etc.) may depend on the oper-

ating environment, the area of application, the configuration, and method of control,

as well as on other conditions of use; these may deviate from the technical specifi-

cations, the Design Guide specifications, or other product documentation. The ac-

tual performance characteristics can be determined only by measurements subse-

quent to integration. Variations in the performance data of mass-produced devices

may occur due to individual differences between such devices. Device samples

were tested in a reference environment for compliance with the legal requirements

applicable to the reference environment. No representation is made regarding the

compliance with legal, regulatory, or other requirements in other environments. No

representation can be made and no warranty can be assumed regarding the suit-

ability of the device for a specific purpose as defined by our customers. Stollmann

reserves the right to make changes to the hardware or firmware or to the specifica-

tions without prior notice or to replace the device with a successor model. Of course,

any changes to the hardware or firmware of any devices for which we have entered

into a supply agreement with our customers will be made only if, and only to the

extent that, such changes can reasonably be expected to be acceptable to our cus-

tomers. No general commitment will be made regarding periods of availability; these

must be subject to individual agreement. All agreements are subject to our Terms

and Conditions for Deliveries and Payments, a copy of which is available from

Stollmann.

Trademarks

The Bluetooth

word mark and logos are owned by the Bluetooth SIG, Inc. and any

use of such marks by Stollmann E+V GmbH is under license. Other trademarks and

trade names are those of their respective owners.