User's Manual
NOTE: If the maximum time entered exceeds that set by the SMS Service Centre, the
time will automatically be reduced to meet the latter.
Destination (
*
*
[User defined 1...5]
)
This feature allows the destination telephone numbers for all new SMS messages to be
stored.
The number appears automatically under Send to: when you are compiling a new SMS
message, while it is always possible to change this by pressing
+
.
This feature is particularly useful when you send a number of messages to the same des-
tination.
Once the destination telephone number has been entered, confirm by pressing
,
or exit without confirming by pressing
-
.
Protocol (
*
*
[User defined 1...5]
)
This network service allows an SMS Message to be converted into other formats such as:
Class 0 SMS, ISDN and PSTN Services, pagers, e-mail, Fax, etc..
NOTE: Only change the preset value 0_Text after having contacted the network opera-
tor or service provider’s SMS Service Centre.
Default (
*
*
[User defined 1...5]
)
This feature automatically sets all of the parameters defined in the previous menus.
Where there are a number of profiles stored, it allows you to choose and apply (until an-
other is defined as being the default) the most suitable on the basis of the SMS Service
Centre used, the destination telephone number, the protocol that you intend using, etc..
Automatic deletion (
*
*
)
This allows automatic deletion of SMS Messages that have been read to be activated or
deactivated.
SAT600 User's Guide 1110...
pagina 50
Mercoledì 11 Ottobre 2000 17.07