User's Manual

 
Swap to [n]
Exchange with call [n]
Retrieve to [n]
Return to call [n]
Disconnect [n]
Ends call [n] which may also be a multi-conference call
Swap to multi
Adds the call to a multi-conference
Split to [n]
During a multi-conference call, allows you to speak to caller
[n] in private
Send DTMF
Allows figures to be written and sent in DTMF
Info [n]
Provides information on call [n]
ECT
Where provided by the network operator, this feature allows
you to conclude a conversation with two callers, and permit
them to continue speaking to each other
Standard Menu
Allows access to the Main Menu
5. Managing calls
The telephone has call management features that can be used while a call is in progress.
During a call the list of available conversation management commands can be accessed
by pressing ' .
If a second call arrives while one is in progress, the display shows the message Call
waiting accompanied by an acoustic signal.
If the ' key is pressed, a three-option menu will appear (use ' to select one of the op-
tions, then ,  to confirm).
Swap to waiting
The incoming call is taken, putting the first call on hold.
If you wish to return to the first call, press ' and then ,  .
Accept waiting
Take the incoming call, and end the first call.
Reject waiting
Reject the incoming call and continue with the one in progress.
During a call, further options may be available:
SAT600 User's Guide 1110...
pagina 38
Mercoledì 11 Ottobre 2000 17.07