User's Manual

27
Connecting to vehicle IO devices
t Ensure that the vehicle is switched off and that the battery terminals
have been removed before connecting the wires.
t Connect the red and then the white wire only after all the other wires
have been connected.
t Ensure that the connections have been formed tightly.
t Ensure that the wires do not interfere with, and that they are not
damaged by the movement of the seats, the pedals, or the handbrake.
Connect the wires in the following order:
t Connect the black (earth) wire to an unpainted metal surface in the
vehicle.
t Connect the blue (stereo mute) wire to the car radio, where fitted.
t Connect the red (+12 V) wire to the vehicle battery’s positive terminal.
Insert a 4 A retarded fuse in series with the power supply, on the
battery side.
t Connect the white (ignition) wire to the ignition indication if the ignition
key has an “ACC” position.
t Connect the microphone and speaker to the cradle.
t Connect the micro telephone to the cradle.
t Connect the cradle to the wires connecting it to the vehicle’s IO devices.