Telital S.p.A. 9 TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL USER GUIDE Telital DMUT User Guide Page 1 of 1 Rev.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 9.1 General This guide provides all the necessary information for the correct use of the GS–GSM DMUT. Figure 1 show the DMUT with a brief description of keys function.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 9.1.1 Display and indications The display show all status and menu of GS–GSM DMUT during the operations. Icons and bitmaps tells to the user all situations and operating modes, telephone numbers, messages, battery charge status, time and other useful informations (see fig. 2). GRAPHIC AREA Figure 2 9.1.1.1 Icons This icon indicates a programmed alarm.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 9.1.1.2 Status indications The status of the dual mode telephone will be given by a led on the front panel and icons on LCD display graphic area. LED status ON = GS operating mode; LED status OFF = GSM operating mode; Icon on Display for the ”GS Maintenance Required” indication; Icon on Display for the ”GS Lock” indication. 9.1.2 Battery charger The DMUT have a rechargeable Lithium ion battery pack and a battery charger.
Telital S.p.A. TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Rev. 0 Net Provider ** GS/GSM DMUT ** where the first line indicates the antenna icon (flashing during network auto search) followed by radio signal intensity (up to 4 bars) and the second line the name of the network operator, or the gateway ID and then the service provider name in G* mode.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 Mute function: Keep pressed conversation. Keypad lock: Keep # pressed for 2 seconds: selected function will be displayed by lock symbol. Keep press the same key for 2 seconds and press the key "5" to unlock keypad. (POWER) for more than 1 second during Net Provider 9.1.5 Phone book 9.1.5.1 Storing a number Key in the number to be stored.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 By pressing ”C” the last character will be cancelled, and if you keep ”C” pressed for longer time all characters will be cancelled. When the desired location appears on the display, press call. (SEND) to place the When recalling a memory location not available on the SIM card the following will be displayed: No record New record? ADN Memories: Available memory locations in SIM card.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. MENU 0 SIM Toolkit menu 1 Own number 2 Missed calls 3 Call divert 1 Clock 1 On 2 Off 3 Parameters 2 Divert always Choose forward All teleservice Speech Fax Data async 3 DivMissedCalls Choose forward If busy If not reachable If no reply All missed calls 4 4 Fast divert Rev.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 MENU 5 Settings 1 1 Audio Ringing 1 Tone 2 Volume 3 2 3 Warning tones Service Beep 5 2 3 4 5 6 7 Display Vibro-Call Keypad-Volume 4 (1 4 ) Standard 1 4 (5 8) Melody 1 4 9) User defined DTMF 1 Brightness 2 Bright.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 MENU 6 Security 1 Pin control 2 1 Change PIN 1 2 Change PIN 2 3 PIN request 1 Phone security Enter Security code...
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 MENU 8 Call control 1 Minute beep 2 Call duration 3 Charge rate 4 Trans. own no.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 9.1.6.1 SMS menu Pressing the is available the SMS (Short Message Service) menu. This menu allows to send and receive short text messages (SMS), to receive messages from the network operator and other supported services. The following diagram show the SMS menu structure. SMS MENU 1 Call mailbox 2 Messages Choose forward 1 Write new 2 Received 3 Written 4 Parameters 5 6 Mailbox number SMS center n.
TECHNICAL MANUAL GS/GSM DUAL MODE USER TERMINAL Telital S.p.A. Rev. 0 9.1.6.2 Globalstar Menu key is available the Globalstar menu. Pressing the This menu partially active only in idle mode, allows to manually select the way of operating at power on of the DMUT. The following diagram show the MS menu structure. MODE SELECTION MENU 1 Mode 1 GS only 2 GSM only 3 GS preferred 4 GSM preferred 1 Error display Active only if DMUT is operating in IDLE mode.
