(QJOLVK
(QJOLVK
INTRODUCTION Thank you for choosing this product. Read the entire manual carefully to make the best use of your phone. This dual mode telephone allows you to make and receive calls all over the world, as it uses - where suitable - terrestrial GSM 900 MHz networks (subject to agreements signed between your network operator and the network you are working on) and elsewhere the Globalstar satellite network.
PATENT INFORMATION This product is manufactured under license to the following patents of QUALCOMM Incorporated (other patents pending): 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,228,054 5,257,283 5,265,119 5,267,261 5,267,262 5,283,536 5,289,527 5,307,405 5,309,474 5,339,046 5,341,456 5,373,259 5,383,219 5,392,287 5,396,516 5,408,697 5,414,796 5,416,797 5,426,392 5,442,627 5,452,473 5,461,639 5,469,115 5,475,870 5,479,475 5,485,486 (QJOLVK 5,487,175 5,490,165 5,497,395 5,499
CONTENTS 1 Description ---------------------------------------------------------------------------------------------- 10 Keys Description ------------------------------------------------------------------------------------------- 10 Display indicators ------------------------------------------------------------------------------------------ 11 Satellite antenna ------------------------------------------------------------------------------------------- 13 Positioning of the antenna during use ---------------
PUK and PUK2 codes (8 digits) ------------------------------------------------------------------------ 21 Phone lock password ------------------------------------------------------------------------------------- 21 How to make a call ---------------------------------------------------------------------------------------- 21 Internationals calls ----------------------------------------------------------------------------------------- 21 Automatic redial -------------------------------------------------------
8 Using the phone-book ------------------------------------------------------------------------------- 26 Storing a phone number with associated name --------------------------------------------------- 26 Recalling a phone number ------------------------------------------------------------------------------ 27 Selecting a location --------------------------------------------------------------------------------------- 27 Last numbers dialled -------------------------------------------------------------------
Security (menu 6) ------------------------------------------------------------------------------------------ 35 PIN control (menu 6 1)----------------------------------------------------------------------------------- 35 Phone security (menu 6 2) ----------------------------------------------------------------------------- 35 Call barring (menu 6 3) ---------------------------------------------------------------------------------- 35 Fixed dialling (menu 6 4) ------------------------------------------------
11 Short Message Service Menu -------------------------------------------------------------------- 42 Call mailbox (menu 1) ------------------------------------------------------------------------------------ 43 Messages (menu 2) --------------------------------------------------------------------------------------- 43 Write now (menu 2 1) ------------------------------------------------------------------------------------ 43 Send (menu 2 1 1) ----------------------------------------------------------------
1. DESCRIPTION Keys Key z Description switched on led: connected to the satellite network. Swtiched off led: connected to the GSM network. Blinking led: satellite search. used to make calls, confirm a selection, personalise the menu, find information, access missed calls and to start the unlock procedure. used to access to the menu, to move to the next item, access other options, and to activate the silent ring signal (if pressed for 1 second).
displayed when the divert funtion has been activated. displayed when call barring has been activated. Note: After the disconnection of the SIM, to display the transfers and/or the call barrings, it is necessary to check-out the network in order to know the status. displayed when a maintenance of the telephone is requested, although the detected problems are not so serious to block the telephone. displayed when the satellite network blocks the telephone because serious problems are detected.
Keypad locked. block enabled on telephone calls, SMS access and memory use. displayed during outgoing calls; flashes on incoming calls. automatic answer enabled. the specified network does not provide the service. personalised user message; functions performed by multifunction keys in the menu, in the memory and messages; display of functions (e.g. microphone off, ring activation, etc.); display of credit units if the network offers this type of service.
Satellite antenna Positioning of the antenna in stand-by For satellite network communications the correct use of the antenna of the telephone is fundamental in order to enjoy the enormous potentiality offered by the Globalstar satellite service.
2. QUICK STARTING GUIDE How to make the first call How to receive the first call M Insert a valid SIM card while the tele- M Ensure that the telephone is switched phone is switched off. Refer to chapter 4. Inserting the SIM card. Connect the battery. Refer to chapter 4. Connecting the battery. Connect the telephone to the battery charger to charge the battery. Refer to chapter 5. Charging the battery. The telephone can be used during recharging but the procedure will take longer.
How to store a number in the phone- How to recall a phone-book location book M Press M Dial the number (we recommend to dial N Scroll through the phone-book locaand . tions using the keys the international code without the zeros to be replaced with the character +) and press . Note: for the + character, keep pressed O Press book location. until the plus symbol is displayed.
How to send the first text message How to read the first text message (SMS) (SMS) M Press N Press followed by O Press , DQG M A different ring from the standard veron display with the symbol Press to read a previously received message press and then press twice. P Press R Press and . T Enter the message (the letters are en- U Press twice. tered according to the same criteria applied to enter names in the memory) and press . and scroll through messaand .
3. IMPORTANT WARNINGS ♦ ♦ Refuelling: switch the telephone off when refuelling; the same ries and spare parts; use of other precaution should be taken in parts will render the guarantee the vicinity of chemical plants or null and void. ♦ where explosives are used. ♦ ♦ the telephone: no internal parts of children. can be repaired by the user.
4. INSERTING THE SIM CARD AND CONNECTING THE BATTERY Inserting the SIM card A valid “plug-in” type SIM card is required to use the telephone. This card is supplied by the network operator. Note: keep all plug-in SIM cards out of the reach of children. O Refit the battery as described below in the section “Connecting the battery”. M Lift the antenna from its seat and turn it Connecting the battery anti-clockwise, press the retainer clip to unlock the battery and then slide and lift the battery out.
5. CHARGING THE BATTERY ¨ When the indicator fills all three lines Charging the battery the above symbol is replaced with the following: This telephone is powered by a rechargeable Li-Ion battery. Use exclusively original batteries and battery chargers approved by the manufacturer. to show that charging is complete. Note: the telephone can be used during recharging but the procedure will take longer.
6. MAIN FUNCTIONS Switching on Security code (6 digits) M Press and hold key to switch on the telephone. If the message PINX is di- The security code, 000000 programmed by the manufacturer, enables access to the Phone Security (6 2) sub-menu. splayed enter the code (supplied with the SIM card) and press the left key or PIN and PIN2 codes (from 4 to 8 digits) ¨ The The PIN (Personal Identity Number) is supplied with the SIM card and serves to protect use of the telephone.
PUK and PUK2 codes (8 digits) Automatic redial The PUK (Personal Unblocking Key) code is supplied with the SIM card. This code is required to modify a blocked SIM card. The PUK2 code, supplied by some SIM cards, is required to modify or unblock PIN2. For further information, contact your network operator. When the dialled number is engaged a request message is displayed after which you can press to enable the automatic redial function which attempts to redial the number automatically ten times.
Pause and call wait functions cannot be entered before a number. The P command cannot be entered twice consecutively. The + command followed by the required stored number sends the relative memory contents. More than one of the above commands per number are not admitted. However the stored number recalled in this way may contain another + command followed by the stored number and so on. Pauses and call wait functions depend on the type of SIM card used; not all cards enable these functions.
Answering a call Protecting the keypad When a call is received, the ring signal is activated and the message >>>CALL<<< The keypad can be protected to prevent accidental key action (including ). To lock the keypad with the display empty, press and hold . To unlock the keypad, press the same key followed by . If the automatic keypad lock function is enabled (Menù 5 7) the keypad is locked automatically thirty seconds after a key is pressed.
PNP Private Numbering Plan ECT Explicit Call Transfer If this function is offered by the network operator to the subscribers of this service, it allows to forward a call without dialling the whole telephone number, but only few numbers, previously agreed with the network operator. To activate the service press: (No.) To deactivate the service press: (No.) To know the status of the service (activate or deactivate), press: (No.) (No.
7. CALL OPTIONS The phone features a wide range of functions that can be used during a call. For access to these functions, press and hold . The options available are listed below (depending on the type of service you are subscribed to). Note: the list has been sorted in chronological order of incoming and/or outgoing calls. Disconnect Ends the selected conversation. Join/Divide This function enables you to make a conference call with up to six persons. Select the option Join Conf.
8. USING THE PHONE-BOOK Names and numbers can only be stored in the SIM card memory. The number of positions in the standard memory on SIM cards varies according to the type of card. The same applies to the maximum name length, number length and storage of last calls made. Note: to move the cursor to the left press ; to move to the right press . The following characters are available: Storing a phone number with associated name M Enter the phone number. N Press .
Recalling a phone number Selecting a location To recall a number by name: This telephone has the facility to identify a name or number by scrolling through the contents of the phone-book rather than entering a number. This is especially useful when you wish to divert calls to a different number or send a short text message to a telephone number.
Last numbers dialled Phone-book menu The telephone stores the last twenty dialled telephone numbers. To recall the last number press or use and to scroll through the others in the list. Note: when the SIM card is removed the telephone numbers are stored in it. Therefore, in this case, the quantity of the last stored numbers is SIM card dependent. Press and then for a second for access to this menu.
9. MENU FUNCTIONS The telephone features a series of functions which enable modification to operation according to your specific requirements. These functions are divided into menus and sub-menus accessible via the menu function. Each menu and sub-menu enables modification and inspection of the various functions. To access the menus or submenus, simply scroll through the list (standard method) or enter the associated number (short method). In this case, simply enter the required code and press .
e Warning tones 0 SIM Toolkit 1 Own number f 2 Calls 3 Call Divert Fast divert On Off Parameters Divert always All teleservices Speech Fax Data async DivMissedCalls If busy If not reachable If no reply All missed calls Cancel All DivMissedCalls Divert always n o p q g c d e o c d e f c d e f p c d e q n Set o Alarm r 5 Settings Audio c Ringing d (QJOLVK c d e Clock n 1 On 2 Off Service Beep 1 On 2 Only NoServ 3 Off DTMF 1 On 2 Off Display Brightness Bright.
6 Security PIN Control Change PIN1 Change PIN2 PIN request 1 Enabled 2 Disabled Phone security Type 1 On 2 Off 3 SIM list Clear SIM list Change code Autoblock 1 On 2 Off 3 Change code Restore defaul Call barring Outgoing 1 Outgoing calls 2 International 3 Only to home Incoming 1 Incoming calls 2 Call if abroad Cancel Change code Fixed dialling On Off n o 8 Call control Minute beep On Off Call duration Last call Incoming home Incoming roam Outgoing home Outgoing roam Total time Clear timers Charge rate La
the relevant caller’s name. At the end date and time of the call is displayed. To display in sequence, press or . To erase a missed call, move to the item and press and hold and then confirm. The following pages list the available menu functions with a brief description of each. For access to these functions, refer to information provided in the previous sections.
Clock (Menu 4) Settings (Menu 5) Set (Menu 4 1) Audio (Menu 5 1) This function sets the following in sequence: clock (displayed at the top right of the display) and, after its confirmation, date. In both cases, press to pass from one item to the other. Later this function sets the day: select the required day by pressing and confirm. This function enables you to change the tone and volume of the ring signal.
Key Display Note/Action Language (Menu 5 3) A B C D E F G # LA SI DO RE MI FA SOL Sharp This function enables selection of the display language. The telephone recognises the SIM card automatically and displays messages in the associated language. Note length This function answers a call automatically without pressing a key 6 seconds after the call is received.
Call barring (Menu 6 3) Security (Menu 6) PIN control (Menu 6 1) This network service enables barring of outgoing calls (3 options) and incoming calls (2 options) to personalise the type of call in blocks (voice, fax, data and all services). It also enables cancellation of the previously set block and modification of the code for this service provided by the network operator.
Press to display the pre-set networks that can be added to the list. Press to display all data listed for a single network. If the required network is not displayed in the list, use the cursor bar to select User GSM Networks (Menu 7) Search network (Menu 7 1) This function displays the networks that can be received in a specific zone in order to make the manual selection. defined, press and enter the data This function searches for networks automatically.
Transfer own number (Menu 8 4) Call control (Menu 8) Minute beep (Menu 8 1) This network service enables (for all calls) to transmit or retain (leaving the operator’s settings unchanged) your own telephone number to the display of the telephone called. The subsequent functions enable (or not) the option to transmit the number for each single call. This function activates a beep every minute during an outgoing call to indicate duration.
SIM info (Menu 9 3) Information (Menu 9) IMEI (Menu 9 1) Displays the phase (1 or 2) of the SIM card followed by the Mobile Country Code (MCC) number and the Mobile Network Code (MNC) number. This function displays the serial number of the telephone. In case of robbery, inform immediately the network operator notifying this number (supplied with the sales pack) in order to block the use on GSM networks offering this service. Total life (Menu 9 4) Displays the total time of incoming and outgoing calls.
10. MENU SATELLITE and provides rapid access to the satellite menus This menu is accessible by pressing where the settings could be modified and information obtained. Menu 1 and 3 are available only if not in conversation. Menu 2 and 3 are available only if connected with the satellite network, and not with the GSM terrestrial network. Menu 4 is available (with certain exceptions, explained further on) on both networks.
The following pages list the menu functions available together with a brief description of each. To access these functions, refer to the section on using the menu. Note: if there is no terrestrial GSM network signal, the telephone will switch on the Globalstar satellite network.
Network list (Menu 3 3) GS service (Menu 3) Search network (Menu 3 1) This function has the same use as already explained to set up a list of networks (7 3) but is available only for the satellite networks. This function has the same use as already explained for the terrestrial GSM network search (7 1), but allows to search for all Service Providers available on the satellite you are connected to.
11. SHORT MESSAGES SERVICE MENU and provides rapid access to the voice mailboThis menu is accessible by pressing xes, option for transmission and receipt of short text messages (SMS) and messages sent by the network to all subscribers in a specific area (Cell Broadcast). The text message function (SMS, Short Message Service) is a service that may not be available on the network. To use SMS, call a message centre number (supplied by the network operator).
The following pages list the menu functions available together with a brief description of each. To access these functions, refer to the section on using the menu. In messages only, the two keys -sm- perform additional functions according to the symbol located above the key: enlarge message answer incoming message or update previous message enter message enter telephone number To enter a series of numbers after entering a message, press for one second after which is displayed.
If the message was previously enlarged press before deleting. To reply to a message, press enter the message on request, confirm by pressing and enter the number to be called. To call the sender of the message, press and for one second; if several numbers are present in the message, select the required number using or and press twice: the first time to select the required number and the second to make the call.
Service Centre number (Menu 2 4 2) Set default (Menu 2 4 6) Enter the Service Centre number supplied by the network operator. Note: do not confuse this number with that of the message recipient. This function activates the selected parameter. In case of several stored profiles, it allows you to chose and applicate (as long as another is not set as default) the selected parameter.
This function displays the messages sent by the network operator to all subscribers of an area, containing news and information on hospitals, surgeries, chemists, road traffic, taxis, weather forecasts, zone, etc. Note: unless for specific requirements (e. g.
TECHNICAL SPECIFICATIONS Dimensions: Height: 224 mm Width: 65,5 mm Depth: 50 mm Weight: 300 gr.
(QJOLVK
